Declare
The copyright of this manual belongs to the company, and all rights are reserved. The company reserves the right to change this manual at any time without notice. For specific product specifications, please refer to the actual product.
No part of this manual has been expressly authorized by the company in writing, and no other company or individual is allowed to copy, plagiarize, translate or disseminate this manual for commercial profit.
Before ordering products, please contact our company to find out whether the product performance meets your requirements. The product does not fully have the functions described in this manual. Customers can increase the functions of the product according to their needs. Please contact our company's technicians or salespersons for details.
The information provided in this manual strives to be accurate and reliable. However, the company does not assume any legal responsibility for the consequences of the infringement of this manual.
Common sense of safe use:
• Before use, please read the product user manual carefully.
• Turn off the power when you need to operate the product.
• Do not plug or unplug with power to avoid some sensitive components from being burnt by instantaneous surge voltage.
• The operator must take anti-static measures before touching or performing other operations that may cause electrostatic shock.
Avoid frequent booting to cause unnecessary damage to the product.
Standard Mini-ITX architecture motherboard, interface definition, product specifications, I/O interface, motherboard function, usage method.
This user guide consists of the following parts: Chapter 1: Product Introduction
You can learn about the motherboard's architecture, platform used, basic specifications, performance characteristics, and application industries through the product introduction section, allowing you to accurately grasp the information of the entire platform and the features of the product in a short time .
Chapter 2: Motherboard hardware details
This chapter guides customers to build various application platforms through a detailed description of the definition of various I/O interfaces of the motherboard.
Chapter 3: Component Installation Instructions
You can learn about the installation and precautions of the main components of the motherboard through the introduction in this chapter.
1.1 Product introduction
In order to adapt to changes in market demand, our company has developed and designed an entry-level gateway server motherboard product that meets the market demand for the network security and security monitoring needs of small and medium-sized enterprises. The motherboard is based on the original X86 motherboard designed by the standard Mini-ITX motherboard architecture. The size is only 17cm*17cm. The motherboard has onboard Intel H300 series chipset of the eighth-generation Coffee lake-S platform; adopts Intel high-performance Gigabit network card; with HDMI +DP interface, support 4K@60HZ high-definition video playback; with HTPC function, it can be built into a security monitoring server to achieve remote monitoring, network security, media server and other requirements.
The board is equipped with 2 SATA ports, 1 mSATA slot, 2 laptop memory slots, 1pcs PCIe 4X slot, 8 USB (including 2pcs USB3.0 at the rear, 2pcs USB2.0 pins at the front, one at the front) Group USB3.0), 2 COM ports, etc., to meet different expansion needs of users.
1. High reliability
The motherboard uses Intel’s eighth-generation coffee lake-S platform H300 series chipset, and the CPU power supply uses a switching power supply, which can provide the CPU with a stable, sufficient and high-efficiency power supply. The power supply of the memory also uses the same switching power supply to ensure the stability of the whole board. At the same time, all peripherals have added some anti-static and anti-interference components to ensure that the system can be stable, efficient and long-term work.
2. High performance
Supports 2 SATA interfaces, up to 4 Intel Gigabit network cards, can build an entry-level gateway server to achieve
Network control, video surveillance and other requirements. At the same time, the performance of the platform is significantly improved.
3. Complete BIOS support, support for diskless startup and wake-up on LAN. And the hardware power-on automatic boot function is specially designed, which is more reliable and stable than the automatic power-on function set in the BIOS.
1.3 Product feature
1.4 Parameter description
specification | parameter |
CPU | Adopt Intel H300 series chipset, support Intel eighth generation Coffee lake-S full series CPU |
chipset | H310 |
Graphics card | Adopt Intel H300 series chipset, support Intel eighth generation Coffee lake-S full series CPU |
RAM | 2xSO-DIMMs,DDR4 2133MHz Memory,Max.32GB |
网卡 | Gigabit, Intel chip network card (up to 4) |
Audio | Integrated 6-channel audio ALC662 sound card chip |
USB | 8×USB (rear 2USB 3.0, front 2pcs USB3.0, built-in 2 USB2.0 pins) |
PCIe | 1pcs PCIe 4X |
Disk interface | 2pcs SATA interface, 1Pcs MiniPCIe MSATA interface |
Display | HDMI+DP;Optional VGA display output |
Rear I/O interface | DC_IN 12~19V |
2xUSB3.0 | |
4xLAN | |
HDMI+DP | |
1xJack | |
Front I/O interface | Power Bottom |
2xUSB3.0 | |
Internal I/O connector | 2x10pin TPM pin |
2 built-in USB2.0 | |
1 hardware jumper | |
Chassis anti-theft pin (1x2pin) | |
1x F_AUDIO pin | |
1x VGAsocket | |
1x GPIOsocket | |
1x SPDIFPin | |
2x 2*3 2.54 COM Jumper | |
2x 2*5 2.0 COM Pin | |
1x 2*5 2.54 F_PANEL Pin | |
Powered By | DC_in 12~19V Power Connector |
Board Type | Mini-ITX,17x17cm |
Chapter 2 Motherboard hardware interface details and definitions
2.1 Adopt Intel H300 series chipset, support Intel eighth generation Coffee lake-S full series CPU
Types of | Position number | name | Interface description |
Jumper/pin | 1 | CLS_CMOS | CMOS clear jumper |
2 | JP_COPEN | Chassis opening detection pin | |
3 | A_PWON | Incoming call automatic power-on selection jumper | |
4 | JPCOM | COM interface power supply selection jumper | |
5 | S_SATA | SATA1 and MSATA selection jumpers | |
Interface/Socket | A | M_SATA1 | MSATA SSD connector |
B | M_A_WIFI1 | M.2 2230 WIFI socket | |
C | CPU_FAN | CPU fan header | |
D | SYS_FAN | System fan socket | |
E | TPM_Head1 | TPM socket | |
F | USB3_B1 | Front USB3.0 socket | |
G | PWR_SW1 | Front Switch button | |
H | F_USB2_1 | Built-in USB2.0 pin | |
I | F_PANEL1 | Front control panel pins | |
J | COM | Built-in COM pin | |
K | SATA_PW | SATA power socket | |
L | SATA | SATA3.0 socket | |
M | SODIMM | SO-DIMM DDR4 memory slot | |
N | PCIEXP1 | PCIe X4 slot | |
O | SPDIF | SPDIF pin | |
P | GPIO_CON1 | GPIO socket | |
Q | VGA_OUT1 | Built-in VGA display socket | |
R | F_AUDIO | Built-in sound output socket | |
S | DC_IN1 | 12~19V DC power input | |
T | USB3_A1 | 2*USB3.0 interface | |
U | LAN2/USB2_A2 | Gigabit network interface/2*USB2.0 interface (optional) | |
V | LAN1/USB2_A1 | Gigabit network interface/2*USB2.0 interface (optional) | |
W | LAN4 | Gigabit network interface | |
X | LAN3 | Gigabit network interface | |
Y | HDMI_DP1VGA1 | HDMI+DP display output (optional VGA display output) | |
Z | AUDIO1 | Line_0ut+MIC COMBO interface | |
CPU | U1 | CPU socket |
2.2: Description of main pins and jumpers on the motherboard
2.2.1 Built-in COM pin (bit number COM1, COM2)
Pin# | Signal | Pin# | Signal |
1 | DCD | 2 | RXD |
3 | TXD | 4 | DTR |
5 | GND | 6 | DSR |
7 | RTS | 8 | CTS |
9 | RI&Power | 10 |
2.2.2 COM power supply selection jumper (bit number: JP_COM1, JP_COM2, default 1-2Pin)
Pin# | Signal | Pin# | Signal |
1 | RI | 2 | RI&Power Pin9 |
3 | 5V | 4 | |
5 | 12V | 6 |
2.2.3 Automatic power-on jumper (bit number: AUTO_ON1, default 1-2Pin)
Pin# | Signal |
1-2 | On |
2-3 | Off |
2.2.4 Built-in USB2.0 interface pin (bit number F_USB2_1)
Pin# | Signal | Pin# | Signal |
1 | USB_PW | 2 | USB_PW |
3 | USB DO- | 4 | USB D1- |
5 | USB DO+ | 6 | USB D1+ |
7 | GND | 8 | GND |
9 | N/A | 10 | NC |
Pin# | Signal |
1 | +12V |
2 | GND |
3 | GND |
4 | +5V |
Pin# | Definitions | Pin# | Definitions |
1 | HDD_Led+ | 2 | Power Led+ |
3 | HDD_Led- | 4 | Power Led- |
5 | Reset | 6 | Power On |
7 | GND | 8 | GND |
9 | NA | 10 |
Pin# | Signal |
1 | GND |
2 | +12V |
3 | FAN_TAC_CPU |
4 | FAN_CTL_CPU |
Pin# | Signal |
1 | GND |
2 | FAN_CTL_SYS |
3 | FAN_TAC_SYS |
Pin# | Signal |
1 | VCC |
2 | NA |
3 | SPDIF_OUT |
4 | GND |
Pin# | Definitions | Pin# | Definitions |
1 | VCC | 2 | VCC |
3 | GPP_C8 | 4 | GPP_C12 |
5 | GPP_C9 | 6 | GPP_C13 |
7 | GPP_C10 | 8 | GPP_C14 |
9 | GPP_C11 | 10 | GPP_C15 |
Pin# | Signal | Pine# | Signal |
1 | MIC_L | 2 | GND |
3 | MIC_R | 4 | NC |
5 | FRONT_R | 6 | F_IO_SENSE |
7 | GND | 8 | NC |
9 | FRONT_L | 10 | F_IO_SENSE |
Pin# | Signal |
1 | GND |
2 | COPEN_N |
Pin# | Signal | Pine# | Signal |
1 | VCC | 7 | VGA_G |
2 | VGA_C_VSY | 8 | GND |
3 | VGA_C_HSY | 9 | VGA_B |
4 | GND | 10 | GND |
5 | VGA_R | 11 | VGA_SDA |
6 | GND | 12 | VGA_SCL |
Pin# | Definitions | Pin# | Definitions |
1 | CLK | 2 | Ground |
3 | FRAME | 4 | NA |
5 | RESET | 6 | 5V |
7 | AD3 | 8 | AD2 |
9 | 3V3 | 10 | AD1 |
11 | AD0 | 12 | Ground |
13 | SMB_CLK | 14 | SMB_Data |
15 | 3V3_SB | 16 | SERIRQ |
17 | GND | 18 | CLKRUN |
19 | LPCPD | 20 | RSV2 |
The motherboard provides 2 SO-DIMM DDR4 memory slots. You can install DDR4 memory in the SO-DIMM memory slot, the maximum capacity is 32G。
1. There is a gap in the center of the SO-DIMM memory module, but the position of the gap is different for different types of memory modules, please pay attention to the distinction.
2. Insert the DDR4 memory into the corresponding slot at a 45 angle, and ensure the correct position of the notch.
3. Lightly press the memory bar, the shrapnel buckles on both sides of the SO-DIMM slot will automatically close.
Remind you: Before installation, please confirm the specifications of the memory module and unplug the power cord. Otherwise, it may cause serious damage to the motherboard and memory module and lose the product warranty.
3.3 Power
The motherboard uses a DC 12~19V adapter for power supply. Before connecting the power supply, please make sure that all components have been installed correctly and will not cause damage.
enquiry form:
enquiry content:
You have no items to require